Dolomite Mining ProcessFree customized solution
Dolomite Processing Flow
The bulk of the dolomite is broken into small particles by a jaw crusher, a crusher or a dolomite cone crusher, and then sent to the storage bin of the mill by the hoist, and then passed through the vibration feeder and the inclined feed pipe.
The material is evenly sent to the bulk disc on the upper part of the turntable; the material is scattered to the circumference of the circle under the action of centrifugal force, and falls into the raceway of the grinding ring, is impacted, rolled, and ground by the ring roll, and passes through the three-layer loop.
The processing becomes powder, the high-pressure fan sucks the outside air into the machine through suction, and brings the pulverized material into the classifier; the rotating impeller in the classifier causes the coarse material to fall back and re-grind, meeting the requirements of the fine.
The powder enters the cyclone dust collector with the airflow and is discharged from the lower discharge valve, and the airflow with a small amount of fine dust is purified by the pulse dust collector and discharged through the fan and the muffler.